SLURP rare V60 brewing guide

Created by: Jarno Peräkylä

1. Insert the paper filter and rinse it thoroughly with hot water. Discard water.
2. Add 20 grams of coffee ground similar to domestic filter brewer. Make sure the coffee bed is level.
3. Pour 60 grams of water (96 °C degrees) on the grounds. Mix gently with a spoon so that all grounds are wet within 15 seconds. Let bloom.
4. At 0:45, start pouring water evenly all around the slurry with a circular motion. No extra turbulence is needed. Stop once you’re at 300 grams water. This should be around 1:20 so adjust the pouring speed accordingly.
5. Take a spoon and gently stir the surface of the slurry. The idea is to knock particles off from the top edge of filter paper.
6. At 1:45, grab the V60 and give it a gentle stir, again to knock any high-and-dry grounds from the edge of filter paper.
7. The total draw downtime should be around 2:30-2:45. If the draw is too fast, adjust the grind size finer. If the draw is too slow, adjust the grind size coarser.